In the News

June 09, 2009

Miami-Dade County Notice Of Acceptance (NOA)

NOTICE OF ACCEPTANCE (NOA)                                                    www.miamidade.gov/buildingcode
Marks USA, a subsidiary of NAPCO Security Systems, Inc.
5300 New Horizons Blvd.
Amityville, NY 11701

Scope:
This NOA is being issued under the applicable rules and regulations governing the use of construction
materials. The documentation submitted has been reviewed by Miami-Dade County Product Control Division
and accepted by the board of Rules and Appeals (BORA) to be used in Miami-Dade County and
other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product
Control Division (in Miami-Dade County) and/or the AHJ (in areas other than Miami-Dade County) reserve
the right to have this product or material tested for quality assurance purposes. If this product or material
fails to perform in the accepted manner, the manufacturer will incur the expense of such testing and the AHJ
may immediately revoke, modify, or suspend the use of such product of material within their jurisdiction.
Bora reserves the right to revoke this acceptance, if it is determined by Miami-Dade County Product
Control Division that this product or material fails to meet the requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building
Code including the High Velocity Hurricane Zone.

Description: Component Approval - Marks Series 5, 130 & 170 Lockset Hardware Devices for
Commercial Steel Doors - L.M.I.
Approval Document: Drawing No. MD-1, titled "Miami Dade Approved Hardware Components",
sheets 1 through 7 of 7, dated 02/09/04 and 02/13/04, prepared by manufacturer, signed and sealed by
Ronald Ogur, P.E., bearing the Miami-Dade County Product Control Renewal stamp with the Notice of
Acceptance number and expiration date by the Miami-Dade County Product Control Division.

Missile Impact Rating: Large and Small Missile Impact Resistant

Labeling: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and
following statement: "Miami-Dade County Product Control Approved", unless otherwise noted herein.

Renewal of this NOA shall be considered after a renewal application has been filed and there has been
no change in the applicable building code negatively affecting the performance of this product.

Termination of this NOA will occur after the expiration date or if there has been a revision or change
in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as en endorsement
of any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure
to comply with any section of this NOA shall be cause for termination and removal of NOA.

Advertisement: The NOA number preceded by the words Miami-Dade County, Florida, and
followed by the expiration date may be displayed in the advertising literature. If any portion of the NOA is
displayed, then it shall be done in its entirety.
Inspection: A copy of this entire NOA shall be provided to the user by the manufacturer or its
distributors and shall be available for inspection at the job site at the request of the Building Official.
This NOA renews NOA #03-1112.01 and consists of this page 1 and evidence page E-1, as well as
approval document mentioned above.
The submitted documentation was reviewed by Manuel Perez, P.E.

NOA No. 08-1204.03
Expiration Date: April 1, 2014
Approval Date:
Page 1