|
Why are Ornamental Mortise Locks installed upside down and will this affect how the cylinder functions? Ornamental Iron locksets are installed so that the knobs of the Ornamental Iron Door are located above the Front door knob. This allows for less space between...
  |
Modified: 2005-11-22 |
Views: 1676 |
|
|
|
What is Handing on a mortise or cylindrical lockset?
By specifying the handing of a lock, you tell the manufacturer how the latch is to be oriented with the door, and, which side of the lock body is rigid when in the...
|
Modified: 2005-11-19 |
Views: 1478 |
|
|
|
What are mushroom knobs? Mushroom knobs are our standard ornamental knobs with a shortened projection. They are used when there is not sufficient space
between the ornamental iron...
| |
Modified: 2005-11-22 |
Views: 1241 |
|
|
|
How do you clear an IQue Lockset Clearing the lock can be done in a couple of different ways. Function 16 for instance can erase certain parts of the memory. Option Zero clears Users, Schedules...
| |
Modified: 2006-02-23 |
Views: 1195 |
|
|
|
How do I reach IQue tech support? Please check the IQue Knowedge Base for frequently asked questions.
LIVE IQue tech support is available Monday - Friday from 8:00 AM - 8:00PM EST...
|
Modified: 2005-12-06 |
Views: 1142 |
|
|
|
I can't get the outside lever on my IQ1K lock, it slips on the tube but doesn't catch. 1. On the standard key in lever application, make sure you have the key in the cylinder and it is turned approximately 45 degrees.
2. If the chassis has been rotated...
|
Modified: 2006-03-07 |
Views: 1090 |
|
|
|
How do you time a cylindrical classroom lockset Cylindrical Leversets ( Grade 1 and Grade 2 ) need to be timed
|
Modified: 2005-11-22 |
Views: 1089 |
|
|
|
When I install a 91A/3 Marks Metro Lock set , the inside knob is locked as well as the outside. If the inside spindle is not installed properly the knob may not turn freely on one or both sides. The spindle is two pieces, one threaded into the other, and...
| |
Modified: 2005-11-22 |
Views: 1084 |
|
|
|
Installation Issues with Classroom (S-Function) Sets When inserting the cylinder into an S-function cylindrical set, TIMING is the key!
| |
Modified: 2005-11-20 |
Views: 1050 |
|
|
|
What cylinders will fit into your series of cylindrical locks? The 70 series and 90 series locksets can be ordered to accept a wide variety of OEM cylinders. A list of these is available in our price book. About the only...
|
Modified: 2006-01-17 |
Views: 1026 |
|
